Foot protection means guarding your toes, ankles and feet from injury. Believe it or not, your feet have 26 bones for support and 38 joints for movement in each foot. Feet also have blood vessels, ligaments, muscles and nerves, which is why it hurts when you stub your toe or drop something on your foot. Your feet are a critical part of your body that you use every day and, in some cases, enable you to do your job effectively. Protective footwear worn in the workplace is designed to protect the foot from physical hazards such as falling objects, stepping on sharp objects, heat and cold, wet and slippery surfaces, or exposure to corrosive chemicals. We have seen workers that are using short boots with no ankle protection, because they feel those shoes are comfortable and easy to wear. Although they might look comfortable, they don’t provide the necessary protection or support for the ankles. The jobsite often have materials and conditions that can easily damage feet and ankles and therefore every work boot that is use on Marek Projects need to be with the necessary protections to avoid any foot injury, including protection to the ankles.
There are two major categories of work-related foot injuries.
The first category includes foot injuries from: punctures, crushing, sprains, and lacerations. They account for 10 percent of all reported disabling injuries.
The second group of injuries includes those resulting from slips, trips, and falls. They account for 15 percent of all reported disabling injuries. Slips and falls do not always result in a foot injury but lack of attention to foot safety plays an important role in their occurrence.
What should workers know when buying footwear for work? Good footwear should have the following qualities:
- The inner side of the shoe must be straight from the heel to the end of the big toe.
- The shoe must grip the heel firmly.
- The forepart must allow freedom of movement for the toes.
- The shoe must have a fastening across the instep to prevent the foot from slipping when walking.
The shoe must have a low, wide-based heel People buying footwear for work should take the following advice:
- Do not expect that footwear that is too tight will stretch with wear.
- Have both feet measured when buying shoes. Feet normally differ in size.
- Buy shoes to fit the bigger foot. Buy shoes late in the afternoon when feet are likely to be swollen to their maximum size. Consider purchasing shock-absorbing insoles when a job requires walking or standing on hard floors.
- Puncture resistant soles.
- Steel toes.
- Boot extends above the ankle.
- Sole provides good traction.
Type of Injuries Commonly Resulting from Poor Footwear:
- Punctures from nails and tie wire.
- Bruises of the foot.
- Unsure footing.
- Dislocated Ankles.
- Body fatigue.
- Mashing of foot resulting from dropped objects.
|TBT para 08-22-16 Proteccion de Pies.pdf||202.2 KB|